Cummins generator set is a widely used unit brand. Users can operate under the following conditions within the first 100 working hours to extend the service life. Here are ten main maintenance methods for Cummins generators.

1) Make Cummins engines operate at 3/4 throttle load (75%) for as long as possible.

2) Avoid Cummins diesel generators idling for a long time or working at maximum horsepower for more than 5 minutes.

3) Develop a habit of closely watching the engine instrumentation during operation. If the oil temperature reaches 2F [121 ° C] or the coolant temperature exceeds 2F [88 ° C], the small throttle should be closed.

4) When the Cummins diesel generator set needs more power, it can accelerate to the speed controlled by the governor.

5) During the running-in period, check the oil level every 10 hours.

6) Cummins diesel generator set fuel must use "0" light diesel that meets national standard performance.

7) Motor oil should be selected from Cummins (15W / 40CF4, etc.)

8) When the Cummins diesel generator set is started for the first time, the oil system pressure is required to inject the oil, and the turbocharger inlet pipe is removed and 50--60 ml of clean oil is added.

9) After starting, the car should be warmed up at idle speed or no more than 1000r / min until the oil pressure of the main oil passage is stable.

10) When starting, if it can't catch fire within 30 seconds continuously, wait for one or two minutes before starting.