● Using PT pump technology ● Low fuel consumption ● Stable and reliable performance ● Simple and convenient maintenance ● Long service life and low exhaust air ● Emissions meet Euro III standards

1. After the diesel generator is stopped, pay attention to check the diesel generator for "three leaks", lubricating oil, fuel, and coolant 2. Close the fuel valve 3. Close the engine room and exhaust facilities 4. Close the generator output air Open 5. Close the control screen [2] Power key switch, remove the key, and keep it properly. 6. When the diesel generator set is stopped for a long time or the unit is maintained, the negative cable of the start battery of the diesel generator set must be removed. Run out of fuel and coolant.

Benefits

As a mature technology, the advantages of clean and modern Cummins generator set are:

1. Fast product supply

2.High reliability and low life cycle cost

3. High efficiency and business flexibility

4.High-quality electrical performance

5. Complete service and fuel supply infrastructure

6. It can be integrated in factories with high exhaust volume and environmentally sensitive locations.

7.7.5 kW to 25 kW air or liquid-cooled diesel generator sets provide traditional structural sturdiness, durability and reliability in a wide range of applications, as a motive force for remote or temporary land use.

8. From 35 kW to 500 kW, diesel-fueled Cummins generator sets provide backup power or integrated systems, which can be added according to your specific application. The generator sets are widely used.

9. In the range of 600 kW to 2.7 MW, diesel-fueled Cummins generator sets can meet your most demanding needs.

1. After several generators are connected in parallel, a large power generator will supply power to the load. Depending on the size of the load, the number of generators can be determined (the unit consumes the least fuel at 75% of the rated load). To achieve the purpose of saving diesel and reducing the cost of generators.

2. Realize uninterrupted power supply to ensure the normal production of the factory. When the unit is switched, the standby unit can be turned on first, and then the original running unit can be stopped. There is no need to power off halfway.

3. When multiple units operate in parallel, when the load suddenly increases, the current impact is shared evenly by the multiple units, which reduces the stress on each unit and stabilizes the voltage and frequency, which can prolong the service life of the unit.