basic structure

The generator is usually composed of stator, rotor, end cover and bearing. The stator is composed of stator core, wire wrap winding, frame and other structural parts that fix these parts. The rotor is composed of rotor core (or magnetic pole, magnetic choke) winding, guard ring, center ring, slip ring, fan and rotating shaft.轴承 The stator and rotor of the generator are connected and assembled by bearings and end caps, so that the rotor can rotate in the stator to perform the movement of cutting magnetic lines of force, thereby generating an induced potential, which is led out through the terminal and connected in the circuit to generate a current.

working principle

An engine is a machine that converts chemical energy into mechanical energy. Its conversion process is actually a process of working cycles. In simple terms, it burns fuel in the cylinder to generate kinetic energy, which drives the piston in the engine cylinder to reciprocate. Drive the connecting rod connected to the piston and the crank connected to the connecting rod to make a reciprocating circular motion around the center of the crankshaft to output power. Let's analyze this process: A working cycle includes four piston strokes (the so-called piston stroke refers to the distance between the top dead center and the bottom dead center of the piston): intake stroke, compression stroke, expansion stroke (work Stroke) and exhaust stroke.