Function description

The power supply vehicle should have good off-road performance and adaptability to various road surfaces, suitable for all-weather outdoor operation, and have the characteristics of stable and reliable overall performance, easy operation, low noise, good emissions, and good maintenance. Meet the needs of outdoor work and emergency power supply.

Scope of application

With the needs of national construction and development, special purpose vehicles have become important transportation and operating equipment in economic construction, and will have good development prospects. In recent years, due to the increased construction and investment needs of China's electric power, telecommunications, mobile, and Netcom, the power supply vehicle is a live emergency work vehicle designed for these industry needs. It can be used for telecommunication, telecommunications, coal mines, and oilfields related emergency power work, especially for power outage repair and power supply caused by emergency events. Similar bidding information has been available on the Internet for the past two years, but large projects and large-volume purchases have been included in the joint bidding of power generation, mobile, China Unicom, and telecommunications company units.

Use common sense

 Ready to work

(1) When the car is in the parking state, open the two left and right exhaust doors at the front of the car and fix them with hooks, then open the upper air inlet and upper lift door of the car, and lower the hydraulic support.

(2) Double-open doors at the back of the car, first remove the load cable from the cable winch and place one end to the use destination, then connect it with the load equipment, and then connect the other end of the load cable with the quick plug and the power car "load output ", Confirm again that the phase sequence of the output connection is correct, and do a good grounding. If there is no grounding point, you can drive the grounding pole of the vehicle into the ground for temporary and reliable grounding.

(3) Open the right access door, control the operation door and fix it with a hook. Check the antifreeze of the generator set, the oil of the generator, the fuel quantity of the fuel tank, and the battery voltage are normal. Then close the battery switch and check that the output load air switch is at Shutdown state.